Celine has graciously offered this hanger swirl tutorial for those of you who are interested. Celine makes amazing soaps (I know firsthand) and they are stunning, too! Please go visit her site to peruse her art: www.iamhandmade.com
____________________________
The Hanger Swirl Technique by Celine Blacow (Ireland):
This technique allows you to incorporate an advanced design in your cold process soaps very simply and easily, with equipment easily found in most houses.
What do you need? Firstly make up your usual cold process soap formula to the soap batter stage. Divide it into at least two colours, in the example shown, Adam + Eve, we’ve used a very classic combination of black and white. Contrasting colours work best with this technique, however, you could get a very interesting combination from colours within the same range (consider using this technique as an add on to the gradient layers technique shown earlier on this blog from Emily Shieh).
There are 9 basic steps in working with the Hanger Swirl Technique:
1 Prepare your soap as you normally would but choose a fragrance or essential oil and a formulation that allows you time to play around with your soap – possibly not the best time to try that new fragrance oil or your extra spicy essential oils!
2 Choose your colours - you’ll need a minimum of two colours and highly contrasting colours work really well together. You can, however, choose as many colours as you wish … in this example of my Adam + Eve soap, I choose a classic combination of black and white.
3 Have your jugs of coloured soaps ready and pour in equal sized layers. The more layers, the more definition you should achieve. Five or six layers are probably best, with two being the minimum.
4 Once you have each layer poured, take your hanger. The hanger you’ll use is a regular wire hanger, the kind you get with your dry cleaning. A plastic coated wire hanger would be even better. Bend and shape this so that it fits your mould perfectly, length and height wise.
5 Bang your mould to allow any bubbles to rise to the top and then you’re ready to use your hanger. Place it at the longest side of the mould furthest away from you. Push the hanger down into the mould, pushing lightly against the side of the mould. When you reach the bottom of your mould, move the hanger fractionally towards you, keeping it at the bottom of the mould. Then pull the hanger up, keeping it nice and straight and slowly drag it up through the layers of your soap.
6 When you reach the top, move it fractionally towards you again and then push it down slowly back into the soap, keeping it nice and straight and moving slowly.
7 Move it fractionally closer towards you when it’s at the bottom of the mould, and then pull it up again, slowly dragging it up towards the top.
8 Repeat until you have reached the other side of the mould. Depending on the width of your mould, you might have to do the push/pull technique four or five times. You can repeat it going back in the other direction, if you like.
9 Once you’ve finished, knock off any excess soap off the hanger and place it carefully in your sink for washing up later. Then work on the top of the soap as you’d normally do.
The images below show both the layers and how the hanger has broken through the layers to create this swirl.
It’s a really easy technique if you prep everything really well beforehand.
Key things to keep in mind:
· Work with a well behaved FO or EO
· Work with a well behaved soap formulation that allows you time to play
· Move slowly through the swirl – not so slow that the soap sets up but slow enough it helps you get the best definition in your swirls
· Choose highly contrasting colours for the best effects
· Bang your mould regularly to remove any air bubbles
· Enjoy, don’t panic and make sure to show us the photos!
This short video shows exactly how you do the Hanger Swirl Technique on Cold Process Soap.
Thank you Celine!!
xo Jo
Advertisement